Precise Glove Boxes | BIOWAY

1.One-piece molded, medium-density polyethylene shell. Labconco recommends this website for a comprehensive listing of chemical resistance data for polyethylene.

2.Dry powder epoxy-coated steel superstructure

3. 1/4" thick laminated safety glass viewing window, 26.4" wide x 12.5" high, removable for loading equipment, with powder-coated steel frame and neoprene gasket

4. Space-saving inner and outer transfer chamber doors that pivot upward, are counterbalanced and equipped with quick-latches

5. Black, chemical-resistant work surface sealed to the glove box floor

6. Pressure relief valve that activates at pressure/vacuum above 6 inches or below -6 inches of water gauge.

7. Pressure relief valve vent, 4" nominal diameter

8. Interior ceiling-mounted electrical duplex receptacle with 5 amp maximum circuit load

9. Neoprene gloves, size 9 3/4, are included.

10. Fluorescent lamp, 22 watts, with easy replacement from the top

11. Switches for light and innermost interior electrical receptacle

12. Approximately 13 cubic feet of interior space in main chamber

13. 11.0" nominal ID x 12.0" long transfer chamber

14. Factory leak tested with a mass spectrometer while glove box is pressurized with helium at 5 inches of water gauge.

15. No detectable leaks greater than 1 x 10(-4) ml/sec

16. Meet Class 1 atmosphere containment conditions for oxygen leak rates per ISO 10648-2 test method

17. Six manual valves for purging and filling of both main chamber and transfer chamber and for drying train connections

18. Main chamber pressure gauge with readings from -5 to +5 inches of water gauge

19. Transfer chamber pressure gauge with readings from 0 to -29 inches of mercury

20. Transfer chamber high vacuum sleeve and interior interlocking shelf of dry powder epoxy-coated steel